MOBILE ACCESS TOWERS

Aluminium Scaffolding

Light, strong aluminium towers that roll into place. Eight systems, from standard towers to builds that bridge voids and climb stairs.Light, strong towers that roll into place.

8
Systems
Up to 40 m
Working height
Greentag
Greentag-inspected builds
DOUBLE WIDTHSINGLE WIDTHCANTILEVERSKYBRIDGEESCALATORSEMI HIGHOVERLAPPINGAVIATION

Aluminium scaffolding rental

Delivered and installed across Kuala Lumpur, Selangor and the Klang Valley, and nationwide on request.

  • Rent the tower that fits your site, from standard towers to builds over voids and stairs.
  • Installed, shifted and taken down by our own crew, with standby on site.
  • Tell us the site, we pick the system.
THE SYSTEM

Span 400 access tower system

Span 400 welded or Rib-Grip premium design is a lightweight, fast and easy to assemble tower system with a rung spacing of 400 mm. With fewer components to stock or lose this versatile ladder frame tower can be used to construct simple free standing mobile towers or more complex staging systems with a host of accessories.

The new Z-configuration bracing enables quick, trouble-free assembly while providing a very rigid structure.

Available in Single Width and Double Width, with platform lengths of 2 m, 2.5 m and 3 m.

400 mm
Rung spacing
2 – 3 m
Platform lengths: 2, 2.5 and 3 m
3 years
Extended warranty on all standard components
EN 1004
Compliant with EN 1004 and Work at Height Directives. Load Class 3

Eight systems

8 systems
01Double-width tower in the Suria KLCC centre court
Double Width

Our most-used tower. A 1.35 m wide platform gives two people room to work side by side, and it rolls to the next bay on locking castors.

1.35 m wide
1.35 m · Base width2–3 m · Base length: 2, 2.5 or 3 m
02Single-width tower at PNB 118
Single Width

A 0.75 m tower for tight spots. Fewer, smaller parts to store, and extra platforms let a crew work at several heights at once.

0.75 m, for tight spots
0.75 m · Base width2–3 m · Base length: 2, 2.5 or 3 m
03Cantilever platform reaching over an escalator void at Central i-City
Cantilever

A platform that reaches out past the tower base, over escalators, stairs and voids, so the tower stands where the floor allows.

Reaches over voids
Overhang · Reach past escalators, stairs and dropsCustom · Can be drawn in SketchUp and AutoCAD before install
04Skybridge over the escalators at Sunway University
Skybridge

Two towers joined by a bridge deck, so crews work above escalators, atriums and stairwells without standing anything in the void.

Bridges a gap
13 m · Skybridges built at KLIA 2 and Starling MallOver voids · Work above escalators and atriums
05Tower built over an escalator at Sunway Pyramid
Escalator

A tower built to stand on the escalator itself, so ceilings and walls above a moving staircase can be reached safely.

Stands on the steps
On the slope · Legs set to the escalator stepsMalls & banks · Sunway Pyramid, Maybank, IOI City
06Tall tower under the skylight at Elmina Lakeside Mall
Semi High Tower

A double-width tower built for real height: up to 40 m working height, tied into the building above 10 m.

Up to 40 m
1.35 m · Base width2–3 m · Base length: 2, 2.5 or 3 m
07Tall stepped tower against the sky at FFM Perak
Overlapping Towers

Towers set at different heights and linked together, for stairs, tanks and stepped ground where one level won’t fit.

Stepped levels
Stepped · Platforms at different heights, linkedInside & out · Plant rooms, facades and stairwells
08MEGA platforms along a Raya Airways aircraft in the hangar
Aviation

Aircraft platforms have to be safe and comfortable to work on. Our specialists check the zone first, then build access around the aircraft.

Around aircraft
Raya Airways · Wing and fuselage docks in the hangarGE Subang · Towers around jet engines
Not sure?Help me choose
NOT SURE?

Start with the job

KEY FEATURES

Built to go up fast and stay rigid

Span 400 aluminium frames with a ladder section and platform
01

Span 400 frame

High-strength lightweight aluminium alloy construction makes components easier to handle. The Span 400 frame is fully interchangeable with all existing parts and means fewer components to stock and control.

Castor and adjustable leg at the foot of a tower on paving
02

Adjustable leg

A choice of 400 mm, 600 mm and 800 mm height adjustment is provided by Quick-Adjust legs. This provides quick and easy levelling on rough or uneven surfaces. Once loaded they cannot be accidentally released.

A hand clipping an automatic locking brace hook onto a tube
03

Automatic locking brace hooks

Hooks snap into locked position without prior “priming” and an easy-release catch design aids disassembly. The large contact area is over 225°.

Close-up of a fluted aluminium frame rung
04

Fluted frame rungs

Provides better grip and increased slip resistance when climbing frames during assembly or once erected.

Looking up at a worker climbing through a trapdoor platform
05

TX2000 platform

The TX2000 lightweight platform is available in standard and trapdoor formats. It provides all-round edge protection, and all components can be easily replaced should damage occur.

Close-up of a welded joint between a rung and an upright
06

Welded joints

Full circumference welding between two parts, creating a structured connection that is stronger than the surrounding material.

Close-up of a Rib-Grip cold-formed joint between a rung and an upright
07

Rib-Grip cold-form joints

The cold-formed Rib-Grip jointing process is a key feature of the tower system and provides three times the strength and durability of traditional welded joints.

Your job nextStart your quote
COMPONENTS

Frames, braces, platforms and accessories

Every standard part of the system is on this sheet, in Single Width and Double Width where it applies.

  • Frames
  • Ladder frames
  • Walk-through frames
  • Horizontal braces
  • Diagonal braces
  • Toeboards
  • Trapdoor platforms
  • Castors
  • Adjustable legs
  • Ladders
  • Outriggers
Open the full sheet
Component sheet for the Span 400 system: frames, braces, toeboards, trapdoor platform, accessories, castors, adjustable legs, ladders and outriggers, with sizes and weights
FAQ

Common questions

Can I rent aluminium scaffolding from MEGA?

Yes. We rent aluminium towers, from standard Double Width and Single Width towers to special builds over voids, escalators and stairs.

Do you install it for us?

Yes. Our own crew installs, shifts and takes the scaffolding down, with standby on site.

Which areas do you cover?

Kuala Lumpur, Selangor and the Klang Valley, and nationwide on request.

How high can your towers go?

A Double Width tower reaches up to 16 m working height. For more height, the Semi High Tower, tied into the building, goes up to 40 m.

Which system do I need?

Tell us about the site (height, floor and what’s in the way) and we pick the system. Photos on WhatsApp help.

Are your builds inspected?

Yes. Every build is Greentag inspected.

How do I get a quote?

Fill in the quote form, WhatsApp or call us on +6019 268 8913, or email [email protected].

Start your quote

How high do you need to go?

Pick one and we'll take it from there. Or WhatsApp us on +6019 268 8913.